SKU: B38-06N-SET
The ISO 7241 B Series of quick disconnect couplers are used on a large spectrum of hydraulic applications with strenuous quality standards such as the aerospace, automotive, electronics industries. They are also recommended for general purpose, machine tools, mobile hydraulics, and other equipment applications. Our Series B couplers are interchangeable with all ISO 7241 B series couplings.
Body Size: 3/8″ Body
Thread Size: 3/8″ NPT Thread, Poppet Valve
This 3/8″ coupler set consists of a male and female quick coupler.
Features:
- Hardened Steel Self Sealing Poppet Valve Seals Excellent Under High and Low Pressures
- Interchangeable with all ISO 7241 B series couplings
- 3600 PSI Rating
- 14,500 PSI Burst Rating (Coupled)
- Nominal Flow Rate: 6.08 GPM
- Max Flow Rate: 12.15 GPM
- Female Face Diameter 1.38” (35mm)
- Female Length: 2.57” (65mm)
- Hex: 0.86” (22mm)
- Male Face Diameter: 0.75″ (19mm)
- Male Length: 1.67″ (42.5mm)
Interchangeable with:
Manufacturer | Male | Female |
SUMMIT | B38M-06N | B38F-06N |
Parker 60 Series | H3-63 | H3-62 |
Safeway S10 Series | S101-3 | S105-3 |
Faster HNV | HNV 38 NPT M N | HNV 38 NPT F |
Snap-Tite 72 Series | 72N6-6F | 72C6-6F |
Stucchi IRB Series | M IRB38 NPT 800601005 | F IRB38 NPT 800601004 |
Dixon H-Series | H3F3 | 3HF3 |
Eaton HK Series | 3K21 | 3H21 |
DNP HNV Series | HNV-06-06-N-NPT | HNV-06-06-C-NPT |
What’s Included:
- Female Coupler
- Male Coupler
- Female Dust Cap
- Male Dust Cap
Dereck –
I used this for a quick disconnect for an auxillary fuel tank in my truck. Works very well.
Donald –
Bought 2 pair. Just installed the first on the angle plow for my tractor and fit and locked good. no leaking that I could find.
Daniel –
Fittings provided with my Max Jack portable lift leaked during use and caused quite a mess. These fit perfectly, are a much more robust fitting and so far are without leaks, and attach easily. Should have purchased them sooner.
Kier –
Fittings provided with my Max Jack portable lift leaked during use and caused quite a mess. These fit perfectly, are a much more robust fitting and so far are without leaks, and attach easily. Should have purchased them sooner.
David –
I’ve used this product with Dexcool coolant mixed with deionized water which tends to find any weak joints from which to leak from. This fluid, is pumped thru low pressure recirculating chillers.